L
K
NO FURTHER
INDUSTRIAL CONTROL WITH A PC IS NOW A REALITY USING SENSORS WITH A USB INTERFACE & THE INDUSTRIAL CONNECTION SOFTWARE.
|
L
|
INDUSTRIAL CONTROL WITH A PC IS NOW A REALITY USING SENSORS WITH A USB INTERFACE & THE INDUSTRIAL CONNECTION SOFTWARE.
|
Sensors on a local bus monitoring system via a USB PC interface.
The company has developed standard industrial process sensors with integral electronics that provide them with a USB interface. In this way the units can be plugged into a PC USB port or hub, to make a plug and play connection, and also a plant interface network from the engineer’s PC.
The Industrial Connection software is supplied free to each client for computer hard drive configuration this enables a display of current values.
|
USB Sensors |
THE NORMAL INTERFACE CHOICES THE BEST CHOICE IS YOUR PC
|
Dynamic Computer Display |
ALL YOU NEED ARE USB SENSORS AND THE INDUSTRIAL CONNECTION SOFTWARE.
The standard package available consists of
1) Sensor complete with 1 meter of cable terminated with a USB plug
3) The Industrial Connection (Free Software Disc)
4) Installation Guide
WHEN USING THE BTS LINKUP SOFTWARE A NUMBER OF SENSOR OUTPUTS CAN BE DISPLAYED AT THE SAME TIME
A single usb sensor can be powered from a computer and with the aid
of powered usb hubs, multiple sensors can be connected. The benefits
of this are:
A single wire run for transmission
No separate convertors
No complicated software
No separate current loops
Savings on cabling
Direct digital communication
BTS CAN SUPPLY THE FOLLOWING
Sensors with more than 5 meter lengths of cable, usb hubs, power supply, BTS Linkup software
© 2004 Bts Fluid Measurement Ltd.
